Modular Network Crimping Tool Cabler, Dual-Purpose RJ45 RJ11 6P 8P.

Modular Network Crimping Tool Professional, Dual-Purpose 6P 8P RJ11/RJ45.

RJ45 RJ11 Network Crimping Tool Telephone wire Stripper crimping clamp 8P 6P Crimping Pliers
1.Cutting modular cable:
Place the single-bladed side of the tool's cutter facing you and cut the modular calbe to the desired length. Make sure to cut the ends of the cord straight across, not diagonally.
2.Stripping modular cable (Flat Cable):
2a.Insert 6P cable into the two-bladed side of the tool's stripper until it touches the stop guide.
2b.Insert 8P cable into the two-bladed side of the tool's stripper and let it extend a little past the lower cut blade.
3.Squeeze handles until it stops, cable must be kept perpendicular and then pull from the tool.
4.Stripping Round Cable
Insert the cable into the round stripping hole, turn the crimper in counter clockwise direction and cable in clockwise at the same time.
5.Remove the outer jacket, insert the stripped cable into the plug and be sure the left wire at one end matches the right wire at the other end.
6.Place modular plug with cable into the tool's holder. Be sure the stripped wire is between the tab and gold contacts. Squeeze handles until it stops.

Dimensions: 200mm x 53mm x 21mm
Weight: 330g